Fluoroplastic centrifugal pump has many advantages. It is divided into two main centrifugal pumps: IHF centrifugal pump and FSB centrifugal pump. They are mainly used for durability, convenience and high efficiency. It has strong corrosion resistance, high mechanical strength, no aging, non-toxic and non-decomposition. It has the advantages of wide performance parameters, high efficiency, compact structure, simple maintenance, energy saving, etc., avoiding running, running, dripping and leaking in production. Fluoroplastic centrifugal pump design features 1. Based on the design of the traditional corrosion-resistant magnetic pump, the structure of the parts is optimized and the magnetic eddy current is eliminated. Strong magnetic torque makes the product efficient and energy-saving. 2. The IMD magnetic pump adopts a back-pull structure, which can easily carry out internal maintenance and parts replacement without dismantling the pipeline, which is convenient for daily maintenance and maintenance work. 3. IMD-F magnetic pump isolation sleeve is made of polyetheretherketone filled carbon fiber, which has high-strength chemical function, no magnetic loss and high pressure. In case of contact between the outer magnet and the isolation sleeve, there will be no sparks to ensure safe use. Fluoroplastic centrifugal pump product advantages 1. Two compression molding methods are used for lining and high temperature annealing process, which can fully release the internal stress of the lining plastic and avoid cracking. At the same time, the lining plastic and the metal surface are more closely attached, even if working in a high temperature environment, the lining layer is still firm and stable (the all-plastic shell is made of fluorine alloy, so this process is not required). 2. The magnetic rotor in the magnetic pump uses computer-controlled magnetization technology, which is divided into two types: strong magnetic and weak magnetic. The configuration of the weak magnetic rotor has certain advantages in price, and is suitable for low flow, low power conditions or conditions with low technical requirements (such as: college laboratories, etc.). 3. The internal and external magnets of each fluoroplastic magnetic pump have been tested and corrected for dynamic balance to ensure the accurate precision of the magnetic pump equipment. 4. Like the inner magnet, the outer magnet of the fluorine plastic magnetic pump is divided into weak ferrite and high-grade strong magnet NdFeB. Magnetic pumps equipped with ferrite magnets have certain advantages in price and are suitable for working conditions with low technical requirements. 5. Equipped with PEEK (polyetheretherketone) reinforced sleeve, although the PPS (polyphenylene sulfide) reinforced sleeve has high mechanical strength, high temperature resistance, and chemical resistance, the PEEK (polyetheretherketone) reinforced sleeve is obviously better. The pressure resistance of ordinary PPS reinforcement sleeve is only 1.6Mpa, and the pressure resistance of PEEK reinforcement sleeve can reach 3Mpa. Generally used in high-end machinery, nuclear engineering and aviation and other technologies. 6. For the fluoroplastic magnetic pump anti-abrasive parts, there are various material configurations to meet the requirements of different working conditions. Customers can consult our company in detail. 7. Equipped with YE3 high-efficiency energy-saving motor with secondary energy consumption, the power consumption is ultra-low. Although the price is slightly more expensive than the YX3 motor, the daily energy saving can reach 3%-8%. 2BE1 Series Liquid Ring Vacuum Pump

Vacuum pump refers to the components or machinery and equipment that vacuum the evacuated vessels by means of mechanical equipment, physics, organic chemistry or physics. In terms of popularization, vacuum pump is the equipment that improves, creates and maintains vacuum pump in a closed in various ways. Vacuum pump The structure inside the vacuum pump of the vacuum pump manufacturer is very simple, but the installation gap is small. When the gap between the centrifugal impeller plan and the disc plan is maintained at 0.2mm, the vacuum pump can be caused normally. When the gap between the disc and the centrifugal impeller is too large, the vacuum value of the vacuum pump will be reduced or there will be no vacuum value. If the gap is too long, the operation of the motor is laborious and it is very easy to damage the motor. The water ring vacuum pump of the vacuum pump manufacturer uses tap water as cutting fluid, which is low-cost. Because the water bodies in various regions are different, some water bodies are hard. After the vacuum pump is used for a period of time, it is very easy to cause dirt in the pump (the same as the milky dirt in the boiling teapot). The gap between the disc and the centrifugal impeller becomes small, and the dirt in the pump is not eliminated at this moment, The motor runs hard and is very easy to damage the motor or crush the centrifugal impeller. The treatment method is to add the boiler descaling agent to the pump (it is not necessary to disassemble the pump). After 20 minutes, clean it with cold water. Pay attention not to discharge the boiler descaling agent into the cold circulating water of the vacuum pump. If it is difficult to buy boiler descaling agent, dilute hydrochloric acid can be used to solve it. Sulfuric acid has slight corrosion on the pump, which is not better than using boiler descaling agent. The water replenishing and moisturizing relay of the vacuum pump gas-liquid separator of the vacuum pump manufacturer can not be opened normally. The bypass valve must be manually opened to replenish water and moisturize the separation equipment. After on-the-spot inspection, it was found that the floating ball level gauge of the water pump pressure switch installed in the separation equipment was full of dirt, resulting in the magnetic induction switch can not be in all normal positions. As a result, when the separation equipment is in the low level instrument, the PLC did not receive the data signal of the low level instrument and sent out the instruction to open the water replenishment and humidity protection relay, so that the relay can be opened automatically. Vacuum Pump Heat Treatment Guide,Heat Treatment Equipment Liquid Ring Vacuum Pump